Anti-Termite Piping System: How It Works, Cost, Benefits and Who Needs It

Imagine renewing your building's termite protection without drilling a single hole in your marble floor, moving a single wardrobe or closing your hotel for a day. That is what an anti-termite piping system makes possible. It is one of the smartest investments you can make while building a new home or project — and it can also be added along the outside of an existing building.

This guide explains how termite piping works, how it is installed, how refills are done, what it costs and how to decide if it is right for you.

What Is an Anti-Termite Piping System?

An anti-termite piping system — also called a pipe reticulation system, termite pipe treatment or, in Hindi, deemak piping — is a network of special perforated pipes laid in the soil under the floor and along the walls of a building. The pipes are connected to small refill (junction) boxes on the outside walls.

Termiticide is pumped into the boxes, travels through the pipes and seeps out through the tiny perforations into the soil around them. This creates a continuous chemical barrier that termites cannot cross. When the protection needs to be renewed, termiticide is simply pumped in again — no drilling, no broken tiles, no mess.

The Parts of a Piping System

Part	What it does
Perforated pipes	Laid in the soil along the walls and across floor areas; release termiticide evenly into the soil
Plain connecting pipes	Carry the termiticide from the refill boxes to the perforated network
Fittings	Elbows at turns, T-joints at crossings, connectors and end plugs keep the network complete
Refill (junction) boxes	Small access points on the outside walls where termiticide is pumped in during every refill
Termiticide	A government-approved chemical that forms the barrier in the soil

Piping vs Other Termite Treatments

	Piping system	Pre-construction soil treatment	Drill-fill-seal (post-construction)
When it is done	During construction, or along the outside of an existing building	During construction, in stages	After the building is complete
How protection is renewed	Termiticide pumped through the refill boxes	A new treatment, usually by drilling	Drilling and injecting again
Disturbance to floors and furniture	None during refills	None during construction	Small holes along wall–floor joints
Best for	Premium flooring, hotels, hospitals, offices, builders	Every new building	Existing homes, flats and shops
Our price (plus GST)	About ₹25 per sq ft	₹12 per sq ft	₹10 per sq ft up to 1,100 sq ft; ₹7 above

For a full comparison of soil treatments, read pre-construction vs post-construction anti-termite treatment.

How Piping Is Installed in a New Building

In a new building, the pipes are laid at the plinth stage, before the floor is cast. The installation has to be done carefully, because it cannot be redone once the floor is laid.

1. Planning: using your floor plan, our team marks the pipe lines along the walls and across the floor areas, and decides where the refill boxes will be.
2. Sand bed: the pipes are laid on a prepared bed of sand, so they stay stable and the termiticide spreads evenly.
3. Laying and fixing: the pipes are arranged in a net-like pattern and fixed in place with hooks or clamps. Elbows are used at sharp turns and T-joints where lines cross.
4. Connecting to refill boxes: plain pipes take the network up to refill boxes on the outside walls, placed at regular intervals along the system (about one for every 30 metres, or 100 feet, of pipe).
5. Flow test: termiticide is pumped through the system. Within about 15 to 20 minutes of pumping, the soil along the whole length of the pipe should be wet — this confirms the network is working.
6. Covering: the pipes are covered with sand, so that cement never touches them directly. Then the floor work continues as normal.
7. Records: the pipe layout and the positions of the refill boxes are recorded, with photos in our app, so future refills are quick and accurate.

Pipes are not laid in wet areas such as bathrooms. Many builders combine soil treatment at the foundation stage with the piping system for future refills; our team will advise what your site needs.

Piping for Existing Buildings

Already living in your house? Piping can still help. In an existing building, a trench is dug along the outside of the walls, the perforated pipes are laid and connected to refill boxes, the trench is filled back, and the system is charged with termiticide. This creates a renewable barrier around the whole building, so termites from the garden and surrounding soil are stopped before they reach the walls.

If termites are already active inside, the joints between the inner walls and floors are treated by drill-fill-seal as well, and infested woodwork is treated separately. Our expert will recommend the right combination after inspecting your property — see what happens during termite treatment.

Refill (Recharge) Service

A piping system protects only as long as there is enough termiticide in the soil, so it needs to be refilled from time to time. The right interval depends on your soil, the moisture around the building and the termite activity in the area. After inspecting your site, our team sets a refill schedule for you.

On a refill visit, our team connects a pump to the refill boxes and pumps fresh termiticide through the network. There is no drilling, no moving of furniture and no need to vacate the building. Keep the refill boxes easy to reach — do not tile over them or hide them behind planters.

Benefits of an Anti-Termite Piping System

• No drilling for renewals: your marble, granite, tiles and wooden floors stay untouched.
• No disruption: no need to empty wardrobes or move furniture; hotels, hospitals, schools and offices keep working.
• Even coverage: the termiticide reaches the soil along the whole pipe network, including places that are hard to reach by drilling.
• Planned, long-term protection: refills keep the barrier going year after year.
• Value for premium properties: the cost is small compared to the woodwork, flooring and interiors it protects.

Things to Know Before You Choose Piping

Piping is excellent, but it works only when it is planned and maintained properly:

• Plan it early: for full coverage under the floor, the pipes must be laid before the floor is cast. In an existing building, piping can go only along the outside of the walls.
• It needs refills: piping is not “install and forget”. The barrier has to be refilled on schedule.
• Installation quality matters: a sand bed, no direct contact with cement and a proper flow test make the difference between a system that works and one that is blocked.
• Keep the records: know where your refill boxes are, and keep them accessible.
• Inspections still matter: a yearly termite inspection, using tools like Termatrac iTraker, confirms the barrier is doing its job.

How Much Does an Anti-Termite Piping System Cost?

Our anti-termite piping system costs about ₹25 per sq ft, plus GST. For example, for a 2,000 sq ft house the estimate is around ₹50,000 plus GST. The final price depends on:

• the built-up area and the total length of walls;
• the layout of the building and the number of refill boxes needed;
• whether it is a new building or an existing one that needs trench work outside;
• whether it is combined with soil treatment at the foundation stage.

Our expert visits your site for free, checks the drawings and confirms the exact price before any work starts. Every installation comes with a written warranty, and its terms are set after the site inspection. See all our termite prices in the termite treatment cost guide.

For Builders, Architects and Contractors

If you are building apartments, villas, hotels, schools, hospitals or factories, piping is a feature your buyers and clients will value. We plan the work around your site schedule, lay the pipes at the plinth stage and record every stage with photos in our app, so you have proof of the work for your client. Send us your drawings for a project quotation.

Why Choose Indian Pest Management for Termite Piping?

• Protecting homes, offices and factories from termites since 2012.
• Government licensed and ISO 9001:2015 certified, with an IIT-trained team.
• Termatrac iTraker inspection to find hidden termites without drilling.
• Government-approved chemicals, with every job recorded in our app.
• Installation, refills and warranty support from one local team.

We serve new and existing buildings from our branches in Dehradun, Haridwar, Rishikesh, Roorkee, Saharanpur and Moradabad. Learn more about our termite control service.

Book a Free Site Visit

Building a new home or project, or want to protect your existing building? Call or WhatsApp +91 94111 22334, book the piping system online, or send your drawings for a builder quotation.